IZOMAX IZOPROOF is a nontoxic solvent based cold applied waterproofing coating general purpose for damp proofing. Which is specifically formulated with a selected petroleum solvent and penetration grade of bitumen and life enhancing additives. When apply from elastic bituminous film with act like as waterproofing system that resists of attack from weather, salts and alkalis.
IZOMAX IZOPROOF is used as a waterproofing most suitable for underground concrete foundations, basements, water tank, old bituminous surface etc. On a wide variety of surfaces like concrete, membranes asbestos cement. bricks, slates, tiles, metal surfaces etc.
The surface to be waterproof should be clean, dry and free from dirt dust and rust and should be repaired and damaged or cracked substrates. Porous surfaces should be primed with IZOPROOF can be used as water retention concrete curing for subground structures.
TOOLS Clean with petroleum solvents
HANDS Use a hand cleaner or solvent followed by soap and water.
HEALTH & SAFETY
Contains petroleum grades of solvent, flammable, keep away from open fire, spark or other ignition sources, wear protective clothes, safety shoes, gloves and goggles.
IZOMAX IZOPROOF should be stored under ventilated covered store at temperature between 5C and 30C. The shelf life of 24 months can be expected for unopened containers stored properly.
Available in 200kg, 100kg and 20Ltr.
at the rate of 0.4-0.6 kg/m2 by roller, soft brush or broom to dump or dry surfaces.
Exceed the performanace requirements of ASTM D 1227 type II and ASTM C30 9
HEALTH & SAFETY
FIRE: Flammable when wet flash point 40c.
SKIN: Avoid repeated or prolonged skin contact. If contact occurs clean with hand cleaner that removes oil and grease, then clean with soap and waters.
EYES: No special precautions required. But if eyes contact cause irritation, flush with clean water.