Kingdom of Saudi Arabia P.O Box 5451, Riyadh 11422
+966 11 810 9641
+966 11 810 9538


General Details

APP IZOMAX VIA II 200+60 is a Bituminous membrane reinforced with Polyester and Fiberglass, Modified With APP (Atactic polypropylene)
Waterproofing of road projects is much easier with APP IZOMAX VIA II 200+60. With is APP modified and reinforced with polyester and fiberglass.
APP IZOMAX VIA II 200+60 is a product is especially for construction projects that required high tensile strength. It is resistant to temperature differences, ensures high endurance and provides utmost protection against damages. As a highly tear resistant product, it can be used in all kinds of waterproofing applications, ensuring high performance.
APP IZOMAX VIA II 200+60 provides protection in extreme temperatures and the high quality polyester (200 or 250 gr/m2) plus fiberglass (60 gr/m2) used as a reinforcement helps the product to stick well to the surface and function as protective layer.

Application Areas

APP modified APP IZOMAX VIA II 200+60 can be used in all areas that require waterproofing such as bridges, viaducts, highways and projects with high tensile requirements that require waterproofing such as bathrooms, pite capping footing, tanking, car parks, bridge decks, viaducts highways, abutments, tank lining, swimming pools, airport aprons, ramp areas and others.

  • Application to various types of substrates
  • The quantity to be used can be determined before the application
  • Its reinforcement system has high tensile strength
  • Reinforcement with high elongation capability
Storage & Preserving
  • Rolls should be installed in an upright position on the delivery vehicle and stored and Carried indoors in the same way.
  • Should not be exposed to ultraviolet rays (UV) and to sudden changes of temperatures
  • Rolls should be covered for protection from UV rays if they are to be stored for a long period of time.
  • No cutting or perforation should be made after the application.
  • It should not be exposed to UV rays after the application without mineral stone cap sheet or protective coating.
  • Rolls should not be put one on top of another if stored without palettes.
  • Maximum two rows should be put one top of another if stored with palettes.
  • Installed by torch welding method, loose – laid of fully bonded to substrate. When loose – laid only overlaps are bonded together, Periph – eres and protrusions are sealed according to specifications.
  • 10 cm (4 inches) over topping shall be allowed for joints and 15 cm ( 6 inches ) over topping for ends by using welding torch.
  • Mineral coated products may be used to protect the upper surface if no covering is planned.
  • Resist splits and tears due to its pliability elongation characteristics.