Kingdom of Saudi Arabia P.O Box 5451, Riyadh 11422
+966 11 810 9641
+966 11 810 9538

IZOMAX POLYSTAR

General

IZOMAX POLYSTAR is a Bituminous membrane reinforced with polyester, modified With APP (Atactic polypropylene)
IZOMAX POLYSTAR is a product is especially for construction projects that required high tensile strength it is resistant to temperature, differences ensures high endurance and provides utmost protection against damages. As a highly fear resistant product, it can be used an all kinds of waterproofing applications, ensuring high performance.
IZOMAX POLYSTAR provides protection in extreme temperatures and the high quality polyester (160 gm) used as a reinforcement helps the product to stick well to the surface and function as protective layer.

Application Areas

APP modified IZOMAX POLYSTAR can be used in all areas and projects with high tensile requirement that require waterproofing such as bathrooms, roofs, terraces, foundations, basements, footing, tanking, car parts, tank, lining, swimming pools, ramp areas and others.

Advantages
  • Application to various types of substrates
  • The quantity to be used can be determined before the application.
  • Resists for the lifetime of the building
Storage & Preserving
  • Rolls should be installed in an upright position on the delivery vehicle and stored and Carried indoors in the same way.
  • Should not be exposed to ultraviolet rays (UV) and to sudden changes of temperatures.
  • Rolls should be covered for protection from UV rays if they are to be stored for a long period of time.
  • No cutting or perforation should be made after the application.
  • It should not be exposed to UV rays after the application without mineral stone cap sheet or protective coating.
  • Rolls should not be put one on top of another if stored without palettes.
  • Maximum two rows should be put one top of another if stored with palettes.
Application
  • Installed by torch welding method, loose – laid of fully bonded to substrate. When loose – laid only overlaps are bonded together.
  • 10 cm (4 inches) over topping shall be allowed for joints and 15 cm ( 6 inches ) over topping for ends by using welding torch.
  • Mineral coated products may be used to protect the upper surface if no covering is planned.