IZOMAX RC – 2 is Cold applied product, east to apply. It doesn’t need thining or heating complies with the requirements and specifications of ASTM D-2027 standard. Which is blended with Penetration grade of bitumen and fast curing solvents, wetting and saturation additives.

USES

IZOMAX RC – 2 Rapid Curing Cut – Back Asphalt Compiles with MOC Specification for Road and Bridge Construction. Treatment of road surfaces and pavement as a prime coat.

Construction works, protective and dam proofing coating, foundation, concrete, meta-timer etc. Soil stabilization.

APPLICATION

suitable for use in the construction & maintenance of pavement as designated in MOC Specification. It is deal for prime coat. IZOMAKS RC-2 is applied to asphalt or granular surfaces using truck mounted spray equipment.

CLEANING

TOOLS Clean with petroleum solvents.

HANDS Use a hand cleaner or solvent followed by soap and water.

HEALTH & SAFETY

Contains petroleum grades of solvent flammable; keep away from open fire, spark or other ignition sources were protective cloths, safety shoe, gloves and goggles.

STORAGE AND PRESERVATION

IZOMAX RC – 2 should be stored under ventilated covered store at temperature between 5C and 30C. The shelf life of 12 months can be expected for unopened containers stored properly.

PACKAGING

Available in 200kg, 100kg

COVERAGE

For tack coats the maximum rate is 0.25 liters/m2 depends on the porosity of the prepared soil surface.

STANDARD

Exceed the performance requirements of ASTM D-2027.

HEALTH & SAFETY

FIRE Flammable when wet flash point 40c

SKIN Avoid repeated or prolonged skin contact: if contact occurs remove with hand cleaner that removes oil and grease; when clean with soap and water.

EYES No special precautions required. But if eyes contact cause irritation, flush with clean water.